Pipe CuNi 90/10 Seamless Copper Nickel Tube 44.5 X 2.5MM EEMUA144

Pipe CuNi 90/10 Seamless Copper Nickel Tube 44.5 X 2.5MM EEMUA144

• 90/10 Cupro Nickel is widely used in sea water. It has very good corrosion resistance to clean moderately polluted marine or estuary water, even containing dissolved incondensable gases.

• This alloy is virtually immune from stress-corrosion cracking and hot spot denickelification.

• In clean sea water, a velocity of up 2.2-2.5 m/s (7.5-8.5 ft/s) is accepted while 4 m/s (13 ft/s) is the upper limit for clean fresh or slightly saline solutions.

LIST OF STANDARD C706 SIZES
 

Round Bar: ¼” Dia. thru 10”

Sheet:065”, .125”

Plate:3/16” thick thru 3”

Tube: Condenser tube

Pipe:¼” Standard (SCH 40) thru 10”

¼” Extra Heavy (SCH 80) thru 4”

½” Class 200 Mil-T-16420 K thru 10”

Fittings: Class 200, SCH 40, SCH 80, Butt-weld Fittings

Threaded and Socket-weld Fittings, 3000#/6000#

C96200 400# Socket-weld Fittings

Flanges: Slip-on, threaded, blind, Weld-neck Flanges

Ameritube has been providing C70600 Copper Nickel 90/10 according to the following standards:

• ASME SB-111
• ASME SB-466
• ASTM B-111
• ASTM B-466
• MIL-T-15005f
• MIL-T-16420k Class 200, 700, 1650, 3300, and 6000

Typical Uses for C706 Copper Nickel "90/10":

AUTOMOTIVE: Power Steering Tube, Brake Lines

CONSUMER: Screw Lamp Bases

INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies,
Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators

MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses

Equivalencies Copper Nickel (90/10) tube/pipe
 

PLUMBING: Flanges